Import vacuum pump maintenance for Lybo vacuum pump,Pronotek vacuum pump, Becker vacuum pump, Edward vacuum pump, Uvlac vacuum pump

Maintenance commitment：         

(1)Offering quotations after free testing, then go ahead to maintenance. Technical dept will write down the specific solutions for quotations, and finally get down to maintenance.

(2)Providing free maintenance for repaired parts and faults.

(3)We will send professional technical engineers for on-site installation within the scope of Guangdong Province. Plus, we have a special after-sales team to follow the customers outside Guangdong Province one by one, offering excellent after-sales service on a national level.

(4)Quality and reputation come first, on-time delivery.

Import Pronotek vacuum pump maintenance：

Starts the motor, when running smoothly, open the outlet pressure gauge and inlet vacuum pump, once it shows the proper vacuum, turn on the valve gradually, meanwhile, Check the vacuum pump maintenance condition when motor loaded.

Manage the flow and head of pumping within the scope indicated on the label, ensuring vacuum pump run at the most efficient point and achieve the best energy-saving effect.

During the operation of vacuum pump, the bearing temperature shall not exceed 35 Celsius and the maximum temperature shall not exceed 80Cesluis.

If the vacuum pump is found to have abnormal sound, stop immediately to find the problem and figure out the solutions.

To stop the vacuum pump, firstly close brake valve and pressure gauge, and then stop the motor.

When vacuum pump begins to work in the first month, it should change the lubricant oil per 100 hours

Frequently adjust padding cap, ensuring the dripping of padding room run smoothly.

Check the wear condition of the shaft sleeve regularly and replace it in time after large wear was found.

For better maintenance of vacuum pump, when it is used in chilling winter, please unscrew the bottom of the pump to release the medium so as to

If vacuum pump is out of use for a long time, all the pumps should be disassembled into parts, which should be wiped to dry. The rotating parts and joint parts should be sealed by grease, and stored in a cool and dry place.